Número Browse:0 Autor:editor do site Publicar Time: 2018-12-26 Origem:alimentado
No capítulo anterior, introduzimos o ordinárioFalhas de tela mecânica e soluções. Em que algumas das falhas são causadas pelo problema do redutor. No próximo, Boeep elaborará na falha e soluções do redutor de engrenagens.
Problems-1: Vibration
| Causa principal | Solutions |
| Transmission misalignment | Inspection, adjustment and alignment |
| Loose connector, damage of fit precision | Fasten loose bolts |
| Dynamic balance failure | Check rotor dynamic balance |
Problems-2: Excessive Noise
| Causa principal | Solutions |
| Poor lubrication | Replace the lubricating oil |
| Poor meshing of gears | Adjust gear meshing |
| The accuracy of each part is reduced and the wear is serious | Adjust the accuracy of each part |
Problems-3: Seal Leakage
| Causa principal | Solutions |
| Wear of shaft seal or reducer seal | Replace shaft seal or reducer seal |
| Oil level is too high | Adjust to the standard level |
| Bearing or journal damage | Replace bearing or journal |
Problems-4: High Temperature of Bearing
| Causa principal | Solutions |
| Bearing wear gap increases | Adjust or replace the bearing |
| Too much or too little lubricant | Appropriate of adjustment of oil quantity |
| Lubricating oil of poor quality or containing impurities | Replace qualified lubricating oil |
| Bearing loosening | Adjust and tighten the bear seat |
